Contact immediately
0102030405
High-Quality Flexographic Printing Machines from China Suppliers | Reliable Factory Solutions
⚙️ Key Features
- Suitable for printing labels, paper, film (PET, OPP, PVC), aluminum foil and other materials.
- Adopts ABB Servo Motors — full servo drive for high-accuracy register; speed changes do not affect print registration.
- Compatible with water ink, LED UV ink, and UV ink for printing different kinds of materials.
- Features a petal-type printing structure for convenient printing cylinder changes.
- 🚀 High speed — maximum speed up to 150 m/min.
📋 Technical Specifications
| Spooling / Unspooling Diameter | 1000 mm |
| Printing Repetition Range | 181 mm – 600 mm |
| Maximum Width | 350 mm |
| Maximum Printing Width | 340 mm |
| Material Thickness | 30–300 g Stirling paper | PET 12–60 μm | OPP 18–60 μm |
| Pitch | 1/8 inch (3.175 mm) |
| Printing Plate Thickness | 1.7 mm |
| Double-sided Tape Thickness | 0.38 mm |
| Printing Accuracy | ± 0.1 mm |
| Power Supply | 380 V, Three-phase, 50 Hz |
| Machine Speed | 0 – 180 m/min |
| Air Compressor | 100 PSI (0.6 MPa) |
| Tension Area | 5 – 100 kg |
| Spooling Motor | 4 kW |
| Printing Servo Motor | 1.8 kW |
| Pulling Servo Motor | 2.9 kW |
❓ Frequently Asked Questions
Q
What types of materials can this printing machine handle?
This machine is designed to print on a wide range of materials, including labels, paper, film types (PET, OPP, PVC), and aluminum foil. Material thickness ranges from 30–300 g Stirling paper, PET 12–60 microns, and OPP 18–60 microns.
Q
What is the maximum printing speed of this machine?
The machine supports a speed range of 0 to 180 meters per minute, with a high-speed capability of up to 150 m/min under optimal conditions, making it suitable for high-volume production environments.
Q
What ink types are compatible with this machine?
The machine is compatible with water-based ink, LED UV ink, and standard UV ink. This flexibility allows it to accommodate different substrate types and end-use printing requirements.
Q
How does the servo motor system improve print accuracy?
The machine uses ABB servo motors in a full servo configuration, which maintains consistent and high-accuracy registration even when the machine speed changes. This ensures a printing accuracy of ±0.1 mm throughout the entire run.
Q
What are the power supply requirements for this machine?
The machine requires a 380-volt, three-phase, 50 Hz power supply. An air compressor providing at least 100 PSI (0.6 MPa) is also required for operation.
Q
How easy is it to change the printing cylinder?
The machine features a petal-type printing structure specifically designed for quick and convenient cylinder changes, minimizing downtime during job changeovers. The printing repetition range spans from 181 mm to 600 mm to support various job sizes.
Get in touch
We're Ready To Assist You Anytime